Distillation 进展

High-volume structured extraction pays a large model's latency on every item, so distilling the task into a small on-device model is attractive: comparable output at a fraction of the time and cost. We measure what that distillation actually delivers, per sub-task. Each news article is mapped to one JSON object with a short summary and five categorical labels. We distill an 8B reasoning teacher (deepseek-r1:8b) into a 0.6B student (Qwen3-0.6B; QLoRA, three seeds), and add two teacher controls: a same-size non-reasoning teacher and a larger managed pipeline. A blinded, reference-free, three-judge panel scores every arm against the full article, alongside two non-distillation baselines, few-shot prompting and constrained decoding. The student runs at about 0.8 s per article against the teacher's 39 s, and recovers 58% of the base-to-teacher gap on summary quality, beating its primary baseline (constrained decoding) by +16.8 points and few-shot prompting by a secondary +4.9. A same-size non-reasoning teacher trains a student no better than the untuned base, so the summary gain follows from the teacher's reasoning nature rather than its scale. Capabilities then split by teacher: the reasoning teacher transfers writing quality and the managed pipeline transfers label diversity, while a same-size instruction teacher's students stay more grounded on the 22 short, thin-source articles in the 93-item test set (74 versus 55 faithful), where the reasoning-lineage student fabricates. That grounding difference is a consistent ordering rather than a significant aggregate effect, and the subgroup is small, so we report it as a direction. Because no single engine wins every field, the deliverable is a per-field routing map for on-device enrichment.

Monocular depth estimation has seen remarkable progress through foundation models achieving robust zero-shot generalization, yet their computational demands place them far beyond the reach of embedded and mobile platforms. Lightweight alternatives exist, but have been developed almost exclusively within single-domain, self-supervised paradigms, failing silently under domain shift. We present ZipDepth, a compact monocular depth network that bridges this gap by combining an efficient reparameterizable encoder-decoder with large-scale knowledge distillation from a foundation model over a large multi-domain training set. Comprising just 6.1M parameters, ZipDepth runs at real-time rates from server GPUs to power-constrained devices, achieving the best trade-off between zero-shot accuracy and deployment efficiency among lightweight models across five benchmarks, taking a significant step towards the accuracy of foundation models with 50x more parameters.

Autoregressive video diffusion enables efficient streaming and long-horizon video generation, but repeatedly reusing generated latents as causal context can amplify temporal errors, resulting in flickering, motion jitter, and structural drift. In this paper, we investigate this failure mode from a spectral kinematic perspective and identify discrete latent acceleration as an effective signal for revealing unstable high-frequency temporal perturbations. To this end, we propose SAGA, a training-free \textbf{s}table \textbf{a}cceleration \textbf{g}uidance approach for \textbf{a}utoregressive video generation. SAGA integrates an acceleration domain spectral guidance objective based on finite-window Slepian projections with a structured autoregressive noise initialization strategy that suppresses short-range temporal correlations while preserving long-range motion structure. Without retraining or modifying the backbone, SAGA can be directly applied to existing chunk-wise autoregressive diffusion models, which is the prevalent setting for high-quality generation. Extensive experiments show that SAGA consistently improves temporal quality across multiple autoregressive diffusion models. On Self-Forcing, SAGA improves Temporal Quality from 97.30 to 97.91 and Image Quality from 69.60 to 70.51. Moreover, spectral analysis and human preference studies demonstrate that SAGA reduces temporal instability while maintaining visual fidelity.

Angular radio maps describe the received-power distribution over the angle of arrival and underpin beam selection and receiver localization in sixth-generation (6G) networks. Predicting the angular power spectrum (APS) from geometry is difficult, because the mapping is ill-posed in non-line-of-sight (NLOS) conditions and must generalize to unseen environments. Distortion-minimizing regressors return the conditional mean, which over-smooths the spectrum and erases the multipath structure that downstream tasks need. We cast the task as a perception-distortion problem and propose RadioDiff-v2, a dual-branch one-dimensional diffusion transformer trained with flow matching. It couples periodic angular encoding, adaptive layer-normalization conditioning, a Fourier angular mixer, and joint velocity and clean-signal heads. A per-metric estimator portfolio reads every deployment quantity from this single model, so that samples carry the distribution, the clean-signal head supplies a regression-grade point estimate, Bayes-optimal rules select beams, and the conditional likelihood localizes the receiver. We prove that a concentrated conditional yields a straight probability-flow trajectory that one step integrates exactly, identifying deterministic transport as the correct inductive bias. On a zero-shot test of 99 environments and one million links, RadioDiff-v2 leads every baseline on every metric, with a 0.39 dB Wasserstein-1 distance, per-bin error below the regression baseline, a 2.43 dB eight-beam NLOS sweep loss, and a 20.6-pixel localization error with four base stations. Code is available at https://github.com/UNIC-Lab/RadioDiff-v2.

We propose OPSD-V, an on-policy self-distillation paradigm for post-training few-step autoregressive (AR) video diffusion models. Existing few-step AR video generators can produce long videos with low latency, but still suffer from error accumulation and weakened motion dynamics during long autoregressive rollout. OPSD-V reduces long-horizon degradation while preserving the original few-step inference path. The key idea is to introduce real long-video data as temporal context during training and use it to provide dense trajectory-level supervision. Specifically, the student follows the exact inference-time rollout, generating each chunk conditioned on its own previously generated KV cache. In parallel, the teacher is evaluated at the same student-visited denoising states, but uses a cleaner AR-consistent temporal cache in which older history can be replaced by real-video context. This provides dense denoising-level corrective targets under on-policy AR cache dynamics, without changing the sampler, number of denoising steps, or inference-time cache mechanism. We apply OPSD-V to representative few-step AR video models, including Self-Forcing and LongLive. Experiments show consistent improvements in visual quality, motion dynamics, and VBenchLong scores. A user study with 10 participants comparing 20 video pairs shows that OPSD-V is preferred over the base models in 66.0% of overall-preference judgments (82.5% excluding ties).

Large language models (LLMs) are increasingly constrained by memory capacity, weight bandwidth, and checkpoint storage during deployment. Existing low-bit compression methods mainly follow two directions. Scalar or group-wise quantization is simple and compatible with efficient low-precision kernels, but its representation capacity becomes limited when the target budget approaches 2 bits per weight. Vector-quantized weight compression provides a richer block-level representation, but usually introduces explicit codebooks, index lookup, and additional storage accounting. This paper presents BiSCo-LLM, a codebook-free binary spherical coding framework for extreme low-bit LLM weight compression. The core pipeline is built on three components. First, local weight chunks are mapped onto a unit hypersphere and binarized into compact spherical codes, so that the main payload is a bit-packed sign stream rather than explicit VQ centroids. Second, a residual BSQ stage encodes the reconstruction error left by the base spherical codec, providing an explicit rate-distortion path without stored codebooks. Third, category-wise recovery distillation is performed after replacing each Transformer module category, reducing the mismatch between local weight reconstruction and assembled model behavior. A small 8-bit protected-channel path is used as an auxiliary stabilization mechanism for sensitive channels and is counted separately from the BSQ payload. The reported storage budget includes binary codes, neural decoders, protected-channel payloads, LoRA adapters, and metadata.

Training tool-use agents to improve from their own experience remains challenging, as supervised fine-tuning relies on fixed teacher-distilled trajectories, while sparse-reward reinforcement learning provides weak supervision for long-horizon interactions. We present DeepSearch-Evolve, a self-distillation framework for web agents built on DeepSearch-World, a deterministic and verifiable environment with reproducible search and page-reading tools. DeepSearch-World contains 420K multi-hop QA tasks constructed from entity-level random walks and supports key agentic cognitive behaviors useful for self-evolving, including progress verification, grounded reflection, and failure recovery. DeepSearch-Evolve iteratively performs trajectory generation, filtering, data mixing, and fine-tuning to train stronger agents. Without distillation from more capable models, DeepSearch-World-9B achieves competitive performance compared with open-source agents, reaching 31.2% on BrowseComp, 61.5% on GAIA, and 93.4% on HotpotQA, showing that verifiable environments enable scalable self-evolution for long-horizon web agents. We will release the environment, 420K training pool, validation set, model, and code to facilitate future research on self-improving deep search agents.

Realistic and diverse traffic simulation is essential to autonomous driving development. Yet prevailing benchmarks predominantly reward realism, and recent methods have optimized accordingly, leaving diversity underexplored. We introduce Flow-ERD, a multi-agent simulator that pursues realism and diversity jointly. Its backbone, Agent-Type Aware Flow Matching (AFM), couples flow matching's multi-modal expressiveness with type-specific kinematic execution. It preserves fine-grained diversity while keeping motions consistent with each agent type. A second stage, Entropy-Regularized Distillation (ERD), fine-tunes the closed-loop rollout distribution with an entropy-regularized reverse-KL objective. This mitigates covariate shift while explicitly preventing collapse onto high-density modes. We evaluate Flow-ERD with a log-free diversity metric alongside standard realism scores. Flow-ERD ranks first on the WOSAC test benchmark and dominates the realism--diversity Pareto front among reproducible baselines. Our project page is available \href{https://seulbinhwang.github.io/flow-erd-project-page/}{here}.

Nonlinear least-squares optimization is central to regression, physics-informed neural networks, and other machine-learning tasks. Such problems have a natural geometric interpretation, model predictions form a manifold in data space, while the chosen parameterization can introduce parameter-effects curvature that becomes a dominant source of nonlinearity. This exposes a limitation of the Levenberg-Marquardt (LM) method, its tangent-space step is applied as a straight update in parameter coordinates. Geodesic acceleration gives a second-order correction, but its removal of parameter-effect curvature is exact only in the infinitesimal-step limit. We propose a Riemann-normal-coordinate Levenberg-Marquardt method (RNC-LM) to improve this consistency for finite optimization steps. By reformulating the geodesic equation, RNC-LM extends geodesic acceleration to arbitrary-order corrections and constructs finite-step updates with progressively higher reparameterization consistency. A line search along the resulting RNC curve controls the traveled distance while keeping the cost close to standard LM. The method eliminates the tangential component of residual acceleration order by order in a moving tangent frame, making the actual objective reduction more consistent with the linear model prediction of LM. On classical nonlinear least-squares benchmarks, RNC-LM improves convergence and robustness in curved valleys and rank-deficient problems. On a reaction-diffusion PINN failure-mode benchmark, it reduces the relative L2 error to the order of 1e-3 and recovers a physically meaningful solution. On a large-scale machine-learning potential-energy-surface fitting task, it achieves a 34-fold speedup over standard LM.

Reliable confidence estimation is essential for deploying large language models (LLMs) in confidence-aware systems, where downstream decisions such as retrieval, tool use, and adaptive computation depend on accurately estimating answer reliability. Existing approaches, however, largely treat confidence as a property of completed responses, overlooking how confidence-related information evolves throughout the answering process. In this work, we investigate confidence from a temporal perspective by comparing pre-solution Feeling-of-Knowing (FOK) and post-solution Judgement-of-Learning (JOL) confidence estimates across frontier and open-source LLMs. We show that post-solution confidence is consistently better calibrated and more discriminative than pre-solution confidence, while linear probes trained on hidden representations recover substantially richer confidence-related information than models explicitly verbalise. Building on this observation, we introduce future confidence distillation, which trains predictors operating on pre-solution hidden representations using teacher confidence estimates produced by post-solution correctness probes. Despite requiring only pre-solution representations for inference, distilled predictors recover much of the calibration improvement achieved by post-solution confidence, remain highly sample efficient, and transfer across datasets within the same domain. Together, our findings demonstrate that confidence-related information evolves throughout the answering process and can be anticipated before answer generation is complete, enabling significantly more reliable yet low-cost confidence estimation.

Agentic language models must learn when to call tools, when to consume tool responses, and when to answer directly. This makes multi-teacher on-policy distillation a natural training strategy: one teacher can specialize in tool calls, another in direct responses, and the student can learn from both on its own generated distribution. We show that this strategy can induce a behavior shift that is invisible from aggregate losses alone. In a two-teacher tool-use setting, vanilla generalized knowledge distillation improves tool-call recall but also moves the model toward over-calling, where it calls tools on examples that should be answered directly. Aggregate explanations are insufficient: tool-call samples do not receive more token exposure, and full-sequence per-token divergence is not larger for the tool-call teacher. We instead analyze behavior leverage imbalance: local token-level signals at mode- entry and structural positions, such as <tool_call> and function names, can have disproportionate control over the global generation mode. We propose Soft Clamp, a per-token divergence calibration method that dynamically compresses extreme token-level Jensen-Shannon divergence while preserving nonzero gradients. On APIGen-MT, Soft Clamp reduces over-calling from 13.7% to 9.0% relative to vanilla GKD while matching its decision accuracy. In a BFCL multi-turn diagnostic, it also lowers tool-call loops and repeated calls among GKD variants. These results suggest that multi-teacher OPD should monitor where teacher signals act, not only how large they are in aggregate.

Classifier-free guidance (CFG) is the standard way to strengthen class-conditioning in diffusion and flow-matching samplers, yet at large guidance it oversaturates and destabilizes, symptoms practitioners suppress with more steps or limited-interval schedules. We analyze CFG through an asymptotic-preserving, numerical-analysis lens. Building on a recent result that the deterministic DDIM step is the unique fitted operator for the unguided terminal layer, exact on the final small-sigma stretch of sampling, we show that guidance re-stiffens exactly the discriminative subspace to an anomalous exponent 1+w. DDIM is therefore no longer fitted there, and on coarse meshes its guided residual diverges as sigma_min goes to zero. We prove a guided clock barrier with three ordered step-size thresholds, and read one-step oversaturation as its endpoint: a solver artifact on the calibration model rather than the continuous guided law. The same analysis yields a one-coefficient, zero-extra-NFE repair: replace CFG's w(r-1) by r^(1+w)-r on the guidance direction. On the calibration model's discriminative crossover, this removes CFG's sigma_min-divergent blow-up and is first-order accurate against the exact guided flow as sigma_min goes to zero. On learned CIFAR-10 checkpoints, and as a cross-domain smoke test on Stable Diffusion 1.5 DDIM, it acts as a high-guidance stabilizer at no extra cost rather than a universal quality knob: it cuts residual amplification and saturation, gives 9/9 point-FID wins over CFG on the tested grid, and preserves classifier-proxy target accuracy in the hard-cell blocks. We report the limits alongside: it is not a universal image-quality win, and against a dense vanilla-CFG reference it is not a uniformly better integrator of that field.

Quantum diffusion models provide a physics-consistent route to generative learning by formulating noising and denoising directly on quantum states. However, applying such models to classical high-dimensional data is constrained by the qubit cost of state encoding and the computational burden of simulating large density operators. We propose a scalable hybrid generative pipeline that combines a classical autoencoder for dimensionality reduction with a mixed-state quantum denoising diffusion probabilistic model (MSQuDDPM) operating in the learned latent space. The autoencoder compresses data into compact latent codes that can be embedded into a small-qubit Hilbert space, after which the quantum diffusion model learns a generative distribution over latent density operators and decodes samples back to the original domain. Algorithmically, we simplify the reverse dynamics by predicting an estimate of the clean state $ρ_0$ at timestep $t$ and computing the one-step reverse update via an analytic backward propagation rule, rather than learning an explicit predictor for $ρ_{t-1}$. We demonstrate the proposed approach on MNIST image generation and discuss how mixed-state quantum diffusion can serve as a practical backbone for hybrid quantum--classical generative modeling under realistic qubit budgets.

Diffusion-based text-to-motion models synthesize realistic human motions but often exhibit semantic drift from the input text. Motion is inherently temporal, especially in compositional and long-duration sequences that require semantic consistency across multiple action segments and smooth kinematic transitions throughout the trajectory. We posit that the initial noise is central to this consistency: within the Gaussian noise space, certain instances, i.e. winning noise tickets, carry latent structure that biases denoising toward particular motion semantics, even under null prompts. We propose WInning Noise Retrieval and Optimization (WINRO), a training-free, model-agnostic framework that improves text-motion alignment by selecting and refining such tickets before diffusion sampling. WINRO maps random noises to motion features generated under null prompts, retrieves the best-aligned noise for a given text, and refines it via a KL-regularized objective that reduces the residual semantic gap while preserving the Gaussian prior. An optional LoRA-based adapter amortizes this refinement into a single forward pass. WINRO consistently improves text-motion fidelity across different base models, MDM and MotionLCM, on HumanML3D without retraining, improves temporal robustness on the MTT benchmark, and generalizes to applications such as motion stylization and spatial constraint satisfaction.

On-policy distillation is a practical post-training recipe for large language models, supplying dense teacher supervision on the student's own trajectories. In privileged-context self-distillation, teacher and student are the same model conditioned on the same prefix, but the teacher also sees a hint or the full solution trace. This makes supervision abundant but harder to trust: the teacher can be confident about continuations its privileged view makes obvious but the student cannot yet justify. The distillation pull is strongest where teacher and student disagree most, and over many updates it accumulates into drift that degrades out-of-distribution (OOD) reasoning. We introduce GeoSD, a geometric self-distillation objective that treats this drift as movement in the student's predictive behavior and counters it in two complementary ways. A Hellinger loss scales each teacher preference by the overlap the student already shares with it, attenuating the pull on tokens the student cannot yet support. Since these pulls still compound over training, a proximal term penalizes how far the student's predictions drift from a recent checkpoint, measured as a Fisher-Rao distance. Both are distances in the same geometry of next-token distributions, and a natural-gradient update takes its steps in that geometry rather than in parameter space. Across mathematical reasoning benchmarks and three model families, GeoSD preserves the in-distribution gains of self-distillation while improving average OOD accuracy by 5.7-8.6 points over the base model, with gains holding across model scales from 1.7B to 32B. Analyzing why standard matching fails out of distribution, we find it wins agreement with the teacher by draining mass from alternatives at high-entropy states, resulting in confident agreement on wrong answers, whereas GeoSD keeps those alternatives in reach.

Video Diffusion Models (VDMs) have demonstrated superior generation quality but suffer from prohibitive computational costs. While recent few-step distillation techniques significantly accelerate inference, they typically enforce a static model architecture across all denoising stages, ignoring the varying computational demands inherent to different noise levels. In this work, we propose a novel post-training acceleration framework that exploits this redundancy by integrating dynamic structural sparsification directly into the distillation process. Unlike conventional post-hoc compression applied to a fixed diffusion pipeline, our approach jointly optimizes the denoising steps and structured model sparsity, transforming a pre-trained VDM into a compact, step-specific Mixture-of-Models (MoM). To address the training instability arising from this joint optimization, we introduce a Progressive Training Strategy coupled with an Output Rollout Mechanism, which ensures the coherent learning of structural decisions across timesteps. Furthermore, we develop a specialized inference engine to deploy the resulting MoM efficiently. Our method is orthogonal to existing acceleration techniques and highly effective: On Wan-14B, it removes 24% of the per-step FLOPs on top of 4-step distillation, adding a 1.2x wall-clock gain and reaching a 30x speedup over the 50-step teacher while preserving competitive generation quality.

We propose D2PO (Dynamic Direct Preference Optimization), a principled framework for optimizing diffusion sampling policies with respect to timestep schedules and classifier-free guidance (CFG) weights. Our work is motivated by a fundamental limitation of existing student-teacher regression frameworks; low-NFE student samplers are trained to mimic high-NFEteachers, often sacrificing high-frequency texture fidelity while preserving coarse global structures, thereby misaligning the sampler with perceptual quality. D2PO addresses this challenge by reformulating sampler optimization as a preference-based alignment problem, leveraging the Direct Preference Optimization (DPO) framework. To make DPO applicable to diffusion samplers, we model the sampling policy as an energy-based model (EBM), transforming preference comparisons into tractable energy differences. We further introduce a novel energy formulation derived directly from the pretrained score network, enabling preference evaluation in perturbed spaces that jointly capture structural consistency and fine-grained details. Moreover, we introduce dynamic preferences, where the preferred samples used for alignment progressively improve as the sampling policies are learned. This self-improving mechanism replaces rigid static teacher supervision with an iterative, preference-guided refinement process, providing progressively stronger alignment signals. Extensive experiments demonstrate that D2PO aligns diffusion samplers with perceptual quality more faithfully, unlocking the full potential of high-quality teachers and consistently outperforming conventional regression-based schedulers under low-NFE constraints.

Diffusion models offer a powerful framework for sampling from complex probability densities by learning to reverse a noising process. A common approach involves solving for the time-reversed stochastic differential equation (SDE), which requires the score function of the evolving sample distribution. The logarithm of this distribution's density is governed by a Hamilton-Jacobi-Bellman (HJB) type partial differential equation (PDE). However, current methods for solving this PDE, such as PINNs or trajectory-based techniques, often suffer from long training times and significant sensitivity to hyperparameter tuning. In this work, we introduce a novel and efficient solver for the underlying HJB equation based on the functional tensor train (FTT) format. The FTT representation leverages latent low-rank structures to efficiently approximate high-dimensional functions, enabling both model compression and rapid computation. By integrating this efficient representation with a backward-in-time iterative scheme derived from backward stochastic differential equations (BSDEs), we develop a fast, robust and accurate sampling method. Our approach overcomes primary bottlenecks of existing techniques, enabling high-fidelity sampling from challenging target distributions with improved efficiency.

Computer-aided design (CAD) for industrial components requires long-horizon procedural modeling, robust feature dependencies, editable parametric geometry, and production-grade B-Rep execution. Existing text-to-CAD methods have made promising progress in generating CAD programs from natural-language descriptions, but they still struggle when user prompts are ambiguous, underspecified, or only describe high-level design intent. They also rarely exploit expert procedural knowledge naturally available in industrial workflows, such as CATIA operation recordings, macro logs, drawing notes, and engineering descriptions. We present ArtisanCAD, a skill-guided industrial CAD agent with expert-grounded knowledge distillation. The core of ArtisanCAD is CAD intermediate representation (CAD-IR), an executable procedural representation that encodes parameters, ordered operations, MCP tool bindings, dependencies, generated entities, and verification rules. CAD-IR plays two key roles: it first serves as the carrier for distilling expert CAD procedures into reusable parameterized skills; then it provides a procedural scaffold that turns vague or intermediate-level prompts into complete executable CAD operations. ArtisanCAD retrieves expert-derived skills, instantiates and revises CAD-IR, executes the resulting procedure through a dedicated CATIA-MCP backend, and uses multi-view visual feedback for iterative refinement, and finally generates production-ready B-Rep models. On the Text2CAD benchmark, CAD-IR improves generation from intermediate prompts by reducing mean Chamfer Distance from $14.83$ to $9.88$, showing its ability to bridge ambiguous textual intent and executable CAD construction. On four complex automotive components, CAD-IR enables expert CATIA recordings to be distilled into reusable skills, allowing ArtisanCAD to generate editable CATIA-native B-Rep models for new variant requests.

Chain-of-thought (CoT) distillation in the recommendation domain is a necessary precursor to RL training, but raw teacher traces are ill-suited to this task. Large teachers approach the recommendation task with unusually high reasoning uncertainty, repeatedly rechecking their answers without revising them; supervised fine-tuning on such traces produces verbose students that never revise their initial guess. Furthermore, due to the novelty of the recommendation domain, the teacher's reasoning traces are highly out-of-distribution for the small student LLM. We propose Student-Aware CoT Optimization for Recommendation Distillation (SCOReD), a CoT optimization framework tailored to recommendation that first parses each teacher trace into typed segments and uses the student LLM's attention to score the importance of each segment. Then SCOReD dynamically selects a per-segment edit (KEEP / REWRITE / FUSE / PRUNE) based on the output length and comparative log probability lift of the answer given the edit as per the student. Therefore, SCOReD prunes redundant sections of the reasoning trace while preserving information-dense sections and adapts raw teacher traces to the student's output distribution. Training on SCOReD-optimized CoTs provides a cleaner learning signal to the student model and improves over baseline SFT by 1.56% NDCG and 1.9% Recall@5, while reducing reasoning length by 27.3%.

Embodied navigation aims to build agents that interpret multimodal goals, reason in 3D space, and reach target destinations reliably in the real world. However, progress remains constrained by the lack of scalable, high-fidelity, and physically grounded interactive environments. Although real-world scanned datasets offer visual realism, they are limited by scale. In contrast, synthetic simulators scale more easily but often exhibit large sim-to-real gaps. We introduce Image2Sim, a real-time neural simulation framework that constructs high-quality interactive environments from posed RGB-D image sequences. The central idea is to decouple 3D spatial anchoring from photorealistic observation synthesis. For scene construction, Image2Sim uses a feed-forward feature Gaussian model that lifts posed RGB-D observations into a 3D feature-Gaussian representation in a single pass. For rendering, we propose a Geometry-Aware One-Step Pixel Flow model that transforms sparse and noisy Gaussian projections into high-quality panoramic RGB-D observations. Image2Sim also serves as a fully automated embodied data engine that generates high-fidelity observations, executable actions, and diverse navigation instructions at scale. It converts large collections of videos and images into nearly 20K interactive scenes and synthesizes more than 10 million navigation training samples. Navigation models trained entirely in these neural environments achieve strong improvements on major benchmarks and transfer effectively to real-world zero-shot settings. These results suggest that scalable neural simulation can serve as a practical training substrate for embodied navigation at scale.

On-policy distillation (OPD) trains a student policy by matching a stronger teacher on the student's own trajectories, offering a promising framework for language agent training. However, its application to long-horizon agentic tasks remains insufficiently explored. We identify two key inefficiencies in vanilla agent OPD: (1) full-horizon rollouts often waste wall-clock resources on tail turns that provide weak and noisy KL supervision, and (2) trajectory-level KL objectives concentrate most of the loss on shallow tokens, leaving deeper decision turns under-trained once initial behaviors are aligned. To address these challenges, we propose TurnOPD, a turn-level budgeting strategy for efficient on-policy distillation of long-horizon agents. TurnOPD consists of two budget controllers: adaptive rollout-depth budgeting, which uses probe-based turn statistics to determine rollout length, and progressive turn-normalized loss budgeting, which gradually shifts KL weighting from token-level to turn-balanced supervision. Experiments on ALFWorld, WebShop, and Multi-Hop Search with task-specialized teacher models show that TurnOPD achieves superior validation accuracy under equal wall-clock training budgets and advances the accuracy--time frontier beyond vanilla OPD.

Game worlds have traditionally been built through labor-intensive production pipelines, making them costly to develop, difficult to customization, and expensive to modify after deployment. Recent advances in video world models offer a fundamentally different paradigm. Rather than explicitly authoring every component of a virtual environment, these models autoregressively synthesize future observations conditioned on the current world state and user interactions, enabling playable worlds to be generated online. Trained on both gameplay recordings and real-world videos, they can capture diverse visual appearances and physical dynamics, opening new opportunities for interactive applications beyond gaming, including embodied intelligence. In this paper, we present AlayaWorld, a full-stack open-source framework for building interactive generative worlds. AlayaWorld enables open-ended real-time interaction, allowing users to freely navigate and perform diverse actions such as combat, spell casting, and monster summoning. The framework unifies the complete development-from data preparation model architecture, model training, inference acceleration, and deployment-within a modular and extensible architecture. Alongside the framework, we release reproducible pipelines, reference implementations, evaluation tools, and comprehensive documentation, establishing a practical foundation for future research and real-time applications of generative world models.

Video face restoration (VFR) aims to recover high-quality and temporally consistent facial details from severely degraded video sequences; however, existing methods still struggle to balance spatial fidelity and temporal coherence under complex degradations. To address this, we propose FADRA, a frequency-aware diffusion framework with iterative residual adaptation specifically tailored for robust VFR. We first leverage the strong temporal consistency of a pre-trained text-to-video diffusion model and introduce lightweight LoRA adapters together with a Low-Quality (LQ) Pixel-Alignment Feature Fusion module to efficiently adapt the frozen generative prior to the VFR task. To further adapt the frozen diffusion backbone to the downstream VFR task beyond LoRA-based adaptation, we introduce a Repeated Residual Adaptation Head (RRAH) for step-wise residual refinement after the diffusion backbone. To make this refinement explicitly guided by the degraded observation, RRAH further takes the LQ latent together with the current velocity prediction as input, allowing the model to repeatedly revisit LQ cues and predict residual updates at each flow-matching step. This LQ-guided repeated residual adaptation helps recover fine facial details while preserving the inherent temporal priors of the pre-trained model. Furthermore, to ensure the structural integrity of perceptually important details, we introduce a Frequency-Aware Loss that provides explicit supervision across multiple spectral bands, emphasizing visually sensitive frequency components that are crucial for perceptual quality and prone to temporal jittering. Extensive experiments demonstrate that FADRA recovers better facial structures and produces more temporally consistent videos than state-of-the-art methods, leading to clear gains in both quantitative metrics and visual perception.

The future of World Models depends not only on scaling model capability, but also on scaling practicality and inference efficiency. High-frame-rate inference enables responsive perception, planning, and control in real-world autonomous systems. To this end, we present MoWorld, a cost-effective yet high-performance Flash World Model with an end-to-end framework spanning data generation, pre-training, distillation, and efficient inference, enabling up to 50 FPS real-time interaction with cinematic visual quality without the need of high-end GPUs. To enable large-scale real-world deployment, MoWorld jointly optimizes model capability and cost throughout the entire development pipeline. Specifically, unlike existing approaches that primarily rely on large-scale video corpora, MoWorld is built upon a scalable 3D-native data engine accumulated from our large-scale 3D vision and generative modeling pipeline, enabling the efficient construction of geometrically consistent training data across diverse real-world and synthetic environments. Based on this foundation, a curriculum cross-frame pre-training strategy for stable and scalable World Model learning, an efficient denoising-step distillation algorithm to reduce diffusion training cost, and a mixed-precision parallel inference framework for low-cost real-time deployment. MoWorld is the first real-time interactive World Model built on the Neural Processing Unit (NPU) and can achieves up to 50 FPS in such the devices, enabling practical and efficient deployment at scale. Comprehensive evaluations demonstrate that MoWorld achieves leading performance; notably, its average inference cost is only 30%-50% of that of existing World Models, providing a practical foundation for large-scale real-world applications of World Models. We also demonstrate diverse applications of MoWorld.

Diffusion and flow matching models generate high-quality samples, but their ODE samplers often need tens to hundreds of neural function evaluations (NFEs). This remains a practical challenge for released checkpoints, since many accelerators require additional design choices and training cost through retraining, distillation, or trajectory redesign. We investigate a different route based on $x$-prediction. During sampling, standard affine probability paths already expose $x_0$ information: an intermediate state and its path velocity determine a principled estimate of the clean sample. We formalize this property as endpoint decodability and show that the decoder is the minimum-MSE estimator $\mathbb{E}[x_0\mid x_t]$ under the usual $\ell_2$ objective. This yields Truncated Jump Sampling (TJS): stop the ODE at an early-exit time $t^*$ and return the decoded $x_0$. TJS requires no retraining, distillation, or architecture change. Across SDXL, SD3.5M, Z-Image-Turbo, and three class-conditional benchmarks, it reduces NFEs by 20--70% with near-matched quality. The analysis also shows why endpoint prediction can work without straightening the trajectory, providing inference acceleration without trajectory redesign.

Diffusion models generate high-quality images, but their inference cost comes from two sources: large denoising networks and repeated denoising steps. Existing compression pipelines usually attack these costs separately. Pruning reduces the network, but most pruning methods still rely on a long post-pruning retraining stage to recover a many-step sampler. Step distillation reduces the number of denoising steps, but it usually assumes a student that can already follow the teacher well enough to receive useful distillation gradients. This paper asks whether post-pruning retraining can be replaced by step distillation. We find that the direct replacement fails: after pruning an EDM2-XS teacher, starting SiDA from the pruned checkpoint produces unusable samples. We introduce a short teacher-alignment repair stage as a bridge between pruning and step distillation. The bridge matches the pruned generator to the teacher on noisy real-image latents, then hands the repaired checkpoint to one-step distillation. On ImageNet-512, the original EDM2-XS baseline uses 124.713M parameters and 63 network evaluations, reaching an FID of 3.53. With a suitable distillation objective, our 20% pruned one-step generator uses 98.826M parameters and one network evaluation, reaching an FID of 3.12. With 30% pruning, the model uses 88.029M parameters and one network evaluation, with an FID of 4.26.

Recent diffusion-based generative models have shown impressive performance in image generation and editing. However, due to memory limitations and the high cost of collecting high-resolution training images, existing methods are typically restricted to inputs with linear resolutions below 1K. In contrast, photos captured by modern mobile devices often reach linear resolutions up to 8K, revealing a significant gap between current capabilities and real-world demands. Simply upscaling low-resolution edited results often results in visually enlarged but blurry images that lack fine details. This paper introduces UltraDiffEdit, a novel, tuning-free image editing framework that extends off-the-shelf latent diffusion models (LDMs) to ultrahigh resolutions. UltraDiffEdit employs a multi-scale progressive editing strategy, iteratively blending high-resolution edited content with unedited areas in a coarse-to-fine manner. We employ multi-patch encoding to preserve both edited and unedited visual details within the latent space. To mitigate editing artifacts, our global-local consistency denoising technique consistently integrates edited and unedited latent features, ensuring smooth transition at editing boundaries from the latent representation to the final image. We also introduce a patch-based hybrid sampling approach that captures local, intermediate, and global features, ensuring semantic coherence and enhancing fine detail during denoising. We conduct extensive experiments demonstrating UltraDiffEdit's superior editing quality and flexibility: it can handle image resolutions up to 8K using only a single NVIDIA GeForce RTX 3090 GPU. The source code is publicly available at https://github.com/LonglongaaaGo/UltraDiffEdit.

Incomplete Multi-View Clustering addresses the problem of clustering multi-modal data when certain views are missing. Recent end-to-end generative approaches leverage diffusion models to recover missing views via stochastic noise-to-data trajectories. While expressive, such mechanisms are not explicitly designed for clustering, as they initialize from cluster-agnostic noise and rely on stochastic denoising dynamics. In this work, we revisit probability path design in end-to-end generative IMVC. We introduce a flow-matching framework with a linear interpolation path between paired view representations, that replaces diffusion with probability flows between observed and missing views. We provide a formal analysis showing that deterministic ODE flows are inherently better aligned with clustering objectives than diffusion-based stochastic trajectories, especially in terms of transport mechanisms that respect class-conditional data distributions and maintain cluster consistency in finite-step regimes. Building upon this insight, we develop an end-to-end IMVC architecture that integrates straight-path flow-matching view completion with cluster-level and entropy-based alignment to enforce cross-view clustering consistency. Extensive experiments on standard IMVC benchmarks demonstrate that the proposed framework establishes new state-of-the-art performance.

Recent advances in video diffusion have been driven by scaling transformer-based architectures to billions of parameters, substantially improving visual fidelity and motion coherence. In contrast, existing mobile video diffusion models remain limited to relatively small parameter budgets, typically 0.4-1.8B, restricting generation quality. In this work, we show that high-quality mobile video generation does not require small models. Instead, we demonstrate that a server-scale 5B-parameter video diffusion transformer can be deployed efficiently on memory-constrained mobile hardware through recurrent reformulation and structured compression. Starting from Wan2.2-5B, we rely on a recurrence distillation framework that converts video generation into a chunk-wise autoregressive process with constant-memory attention computation. Combined with causal linear attention, the model operates as an RNN at inference time while preserving temporal coherence across chunks. We further propose a learnable attention head pruning method based on binary per-head gates optimized end-to-end using a noise-biased sparsity objective and distillation-based finetuning. Together with sampling-step distillation and memory-optimized VAE decoding, MobileWan becomes the first 5B-scale video diffusion model deployable on a commercial mobile device. Our system generates 5-second 480x832 videos at 16 FPS in 20 seconds end-to-end latency, achieving a VBench score of 83.79 and establishing a new state of the art in mobile video generation. Project page: https://qualcomm-ai-research.github.io/mobilewan