每日文章

Recent advances integrate physically grounded Newtonian dynamics with neural rendering frameworks, narrowing the gap between photorealistic scene reconstruction and physics-based animation. However, existing approaches focus on mechanically driven dynamics while neglecting temperature, a fundamental yet invisible physical factor underlying phenomena such as melting, solidification, and other thermomechanical processes. In this paper, we propose MeGAS, a novel framework that incorporates thermomechanical phase-change dynamics into 3D Gaussian Splatting (3DGS). Specifically, we propose a new thermomechanical dynamic Gaussian Splatting representation that augments 3DGS with temperature attributes and employs a heat advection-diffusion solver with MPM dynamics incorporating phase transitions, enabling physically plausible and visually realistic synthesis of thermophysical phenomena. Furthermore, a new topology-adaptive Gaussian rendering strategy is proposed to mitigate cracking and floaters under extreme deformation. Extensive experiments demonstrate that MeGAS produces physically consistent thermomechanical behavior while maintaining high-fidelity photorealistic rendering, advancing toward physics-integrated world models.

Efficient sorter diversion control of automated material handling systems (MHS) is critical for optimizing operational efficiency in large-scale warehouse environments. In this study, we use an inbound receiving sorter at a high-volume e-commerce warehouse as our primary use case, where the sorter diversion system relies on cost functions with static weight configurations that fail to adapt to highly dynamic system contexts, such as volume mode, congestion level, equipment physical status, and upstream/downstream dependencies. To address this real-time sorter diversion optimization challenge, we conducted a comparative study of three candidate hybrid machine learning frameworks: Linear Regression with Gradient Descent Optimization (LR+GDO), XGBoost with Bayesian Optimization (XGB+BO), and Bayesian Contextual Bandits (BCB). Model training and evaluation were enabled by leveraging a high-fidelity physics-aware emulator to overcome the cold-start problem and allow a safe transition from offline to online learning. We performed comprehensive evaluations including reward model predictive accuracy, contextual sensitivity, action distribution, and projected reward uplift. Our results demonstrate that while tree-based reward models offer slightly better predictive power, the BCB framework achieved overall higher performance with 2.03% reward uplift over the heuristic baseline. Furthermore, BCB exhibits several superior characteristics, such as its decisive time-optimal policy backed by Bang-Bang control theory, continuous online learning capability, strategic balance between exploration and exploitation, and significantly shorter inference latency. These results demonstrate the potential of the BCB framework for real-time control optimization in large-scale warehouse environments, motivating further investigation toward operational deployment.

Accurate dynamics models are critical for informed decision-making in robotic systems, particularly for agile aerial vehicles operating under uncertainty. Neural network dynamics models are attractive for capturing complex nonlinear effects, but existing predictive approaches struggle with long-horizon forecasting because their autoregressive rollout mechanism amplifies errors over time. Joint Embedding Predictive Architectures (JEPAs) offer a compelling alternative by modeling dynamics in latent space, yet prior JEPA-style methods for robot navigation have been studied primarily for kinematic-level planning, with limited investigation in high-frequency control. In this work, we introduce the JEPA-style model for real-time quadrotor control. The proposed approach combines a latent dynamics model with a novel physics-inspired prober that maps frozen latents to interpretable state, enabling physically grounded long-horizon prediction. Additionally, we combine the learned model with a sampling-based optimal control solution to take advantage of its predictive capabilities for real-time control on embedded hardware. Finally, to reduce the dependence on expensive and unsafe real-world data collection, we develop a structured pipeline for automated dataset generation. Extensive open-loop and outdoor closed-loop experiments demonstrate accurate prediction, robust zero-shot sim-to-real transfer, and strong generalization across diverse operating conditions.

Pre-trained Vision Foundation Models (VFMs) have become central to modern computer vision due to their powerful semantic representations and strong generalization ability. However, their patchified or pooled outputs are inherently low-resolution, limiting their effectiveness in tasks requiring fine-grained, pixel-level reasoning. Existing feature upsampling approaches either degrade semantic fidelity or rely on VFM-specific retraining and heavy architectures, hindering efficiency and scalability. To address these challenges, we propose RaysUp, an ultra-lightweight, task-agnostic, and VFM-agnostic feature upsampling framework that reconstructs high-resolution feature maps at arbitrary resolutions. Unlike conventional 2D interpolation or attention-based schemes, RaysUp lifts feature reconstruction into a geometry-aware ray domain. Specifically, we introduce a Spatially Decoupled Guidance Encoder for direction-aware guidance encoding, an Any-Resolution Cross-Attention mechanism for resolution-flexible reconstruction, and a novel Ray Positional Encoding (RayPE) that injects implicit 3D geometric priors via 6D Plucker ray coordinates. Finally, a Geometry-Aware Neighborhood Attention module further ensures content-adaptive bilateral aggregation while preserving geometric consistency. Extensive experiments across diverse dense prediction tasks demonstrate that RaysUp achieves state-of-the-art performance while using only 16% of the parameters of AnyUp and delivering approximately 7x faster inference. These results highlight a substantially improved accuracy-efficiency trade-off and establish RaysUp as a practical and scalable solution for universal feature upsampling. Code is available at https://github.com/MAP-RaysUp/RaysUp.

Current end-to-end multi-view 3D reconstruction methods achieve impressive results, but rely on a restrictive static assumption: the scenes is entire distractor-free with perfect cross-view geometry. This reliance on idealized inputs causes even the most advanced methods to fail in real-world settings, where transient distractors and occlusions present. To address this, we propose Visual Geometry Transformer in the Wild (VGTW), an end-to-end framework for robust reconstruction from inconsistent views. At its core, we isolate and suppress distractor-affected regions while preserving the consistent components across views. Specifically, we introduce a Distractor-aware Training (DAT) strategy that separates clean features from distractor-contaminated ones in the attention mechanism while enforcing feature consistency across images. To enable this, we train the model with an auxiliary mask prediction head, using supervision from a new dataset we collected with pixel-level distractor masks. The resulting VGTW model is a feed-forward network that directly outputs clean, distractor-free point clouds. Remarkably, it requires no additional 3D supervision, remains computationally efficient, and is compatible with existing pipelines. Extensive experiments validate our approach, demonstrating state-of-the-art performance and robust generalization in diverse, real-world scenarios.

Reference-based diffusion models enable highly controllable image generation by leveraging elements from input images to guide prompt-driven synthesis. However, these models are computationally expensive in runtime, and their cost scales severely with the number of input references. While the efficiency of diffusion models has been extensively studied in the context of prompt-driven generation, it remains largely under-explored in the realm of reference-based models. This setting presents unique challenges not addressed by methods focusing solely on generation. In particular, the wasteful representation of references as dense token grids offers significant opportunities for improvement. In this work, we present Sparse Context, a method for constructing sparse reference representations by retaining only a reduced subset of reference tokens. We observe that even without modifying the model, dropping a significant portion of reference tokens at inference time largely preserves its generation capabilities. To fully realize this potential, we fine-tune the model with random token dropping at varying ratios, encouraging robustness to partial reference representations. Crucially, this training strategy decouples the model from any specific token selection rule, allowing flexible control at inference time. At inference time, instead of random dropping, we apply task-aware token selection strategies that prioritize the most informative regions of the reference images, adapting the token budget to the input and task requirements. Extensive experiments show our method achieves a 4x increase in inference speed for multi-reference generation and an 2x for single reference generation. Importantly, this efficiency is achieved without compromising visual quality across both spatially-aligned editing and subject-driven generation.

Underwater 4D reconstruction remains challenging due to the coupling between degraded light transport in participating media and dynamic water variations. Most existing Methods are developed under in-air assumptions and do not explicitly account for underwater absorption and backscatter. Additionally, near-static assumptions make these approaches sensitive to drifting particles and dynamic distractors , leading to unstable geometry and inconsistent cross-view results. To address these issues, we propose a generative framework for underwater 4D reconstruction, named Ocean4D, which is built on two complementary components. Specifically, 4D-GCC constructs 4D geometrically consistent conditioning with improved cross-frame coverage, while the Medium-Aware Block performs implicit medium-aware denoising in the latent diffusion process to stabilize underwater appearance under absorption and scattering. Given a monocular video and target cameras, our method generates videos along the target trajectories while preserving global structure and cross-view consistency. Extensive experiments on both dynamic and static underwater benchmarks demonstrate state-of-the-art performance on underwater reconstruction.

6D pose estimation is a key task in computer vision and embodied AI, widely used in robotic manipulation, augmented reality, etc. Existing methods directly regress in a high-dimensional continuous space, facing two key challenges in category-level pose estimation: limited accuracy due to noise and local optima, and inefficient search over an infinite space that hinders real-time performance. This paper proposes Flow6D, a hierarchical flow matching framework with a two-stage discrete latent space localization-continuous pose regression strategy. Rotation and translation parameters are first discretized into bins, with a discrete flow matching model locking the latent space around the true pose to reduce search complexity. Then, by sampling in the latent space, a continuous flow matching model predicts local pose residuals to optimize the estimate and regress to an accurate pose. The framework also naturally extends to articulated objects, outperforming state-of-the-art methods on synthetic and real datasets with real-time inference at 70 FPS. Project website: https://flow6d.github.io/.

We introduce cyclic denoising -- repeated forward and reverse diffusion at controlled noise amplitudes -- as an extraction attack for image diffusion models. Inspired by random organization in disordered solids, cyclic denoising exposes regions of the learned distribution that are largely inaccessible to standard sampling. The dynamics drive samples toward attractors with a broad stability spectrum. The deepest attractors are ultrastable: they regenerate after near-total corruption and persist through thousands of noising-denoising cycles. Many of these attractors correspond to memorized training images, including stock photographs, brand watermarks, and web-crawl artifacts. The attack requires only sampler-level control, with no gradients, weight inspection, prompts, captions, or prior knowledge of the training data. Unlike generate-and-filter attacks, which rely on large-scale prompted generation and post-hoc similarity or membership-inference filtering, our main protocol is fully unconditioned. We demonstrate the phenomenon in Stable Diffusion v1.4 and in a pixel-space DDPM, showing consistent behavior across latent- and pixel-space diffusion models. Across noise amplitudes, we observe a yielding-like transition: low-amplitude cycling produces trivial absorbing fixed points or limit cycles, while larger amplitudes induce rearrangements, basin hopping, and long-lived trapping in structured memorized attractor basins. We also observe hierarchical partial absorption, prompt-stabilized basins, and cross-initial-condition universality of the recovered attractor set. Our results therefore show that cyclic denoising is both a physics-inspired probe of generative landscapes and a practical tool for memorization auditing, with implications for privacy, copyright compliance, and model fingerprinting.

We present HyperQuant (Hadamard, optimallY Packing, Entropy Rice-coding), a unified post-training quantization pipeline for the weights and the KV cache of large language and diffusion transformers. Across a suite of self-contained experiments (Table 1), HyperQuant outperforms the recent HIGGS scheme at every operating point from 3 to 5 bits per scalar (bps) on weights, and beats both TurboQuant and OCTOPUS on KV quantization down to 1.7 bps. Beyond the LLM setting, HyperQuant quantizes the 19B-parameter LTX-2 DiT video model with no observable per-frame artifacts. End-to-end on an H100 at 4 bps, HyperQuant compresses the linear weights ~3.9x and the KV cache ~3.79x at near-lossless quality. HyperQuant combines four known ideas into a single construction: (i) a per-tile Randomized Hadamard Transform that makes the per-coordinate distribution of weights and activations approximately Gaussian; (ii) quantization to a low-dimensional optimal lattice (E8, D4, A2, or Z); (iii) lossless bit-stripping and near-entropy-optimal variable-length Rice coding of the lattice indices; and (iv) bias-correction methods for the KV cache that keep the reconstruction unbiased under inner products, preserving attention semantics. We further integrate the pipeline with 8-bit and 4-bit Tensor-Core MMA paths (fp8-e4m3, int8, nvfp4, mxfp4), and find that int8 beats fp8 on the post-RHT lattice output. Project page: https://moonmath.ai/hyperquant/

Predicting temporal Quality of Service (QoS) data is critical for optimizing network services and rationalizing resource allocation in cloud computing and service-oriented systems. Existing mainstream methods have achieved promising predictive performance. However, their purely data-driven manner limits their ability to capture non-stationary temporal patterns, thereby leading to accuracy degradation when temporal QoS data exhibits fluctuations. To tackle this limitation, we propose a novel Extended Kalman Filter-Enhanced Latent Feature Analysis (EKL) model to perform efficient and accurate temporal QoS prediction from the perspective of bidirectional model-data-driven learning. Its main idea is three-fold: a) designing a model-driven feature producer to obtain the temporal latent features to capture the intricate temporal pattern following the principle of an Extended Kalman Filter; b) building a data-driven feature producer based on the alternating least squares algorithm to identify time-invariant latent features describing intrinsic user-service characteristics; c) exploiting a density-oriented parallel strategy that achieves workload balancing by sorting users in accordance with their service invocation density, which effectively elevates computational efficiency. In addition, we provide a rigorous theoretical analysis to formally prove the convergence of the proposed EKL. Experimental evaluations conducted on real-world temporal QoS datasets reveal that our proposed EKL surpasses existing state-of-the-art models with respect to both computational efficiency and prediction accuracy for missing temporal QoS data.

Multimodal Large Language Models (MLLMs) have achieved remarkable success in visual understanding but remain constrained in visual generation due to the fundamental feature discrepancy between semantic perception and pixel-level reconstruction. Bridging this gap requires overcoming two core challenges: endowing semantic encoders with high-fidelity reconstruction capabilities, and effectively aligning generative models with semantic spaces without relying on external teachers. To this end, we propose a novel unified multimodal framework featuring \textbf{S}emantic-\textbf{P}ixel self-alignment and \textbf{A}daptive \textbf{R}outing (\textbf{SPAR}). First, to reconcile semantic perception with pixel-level reconstruction, we introduce an asymmetric dual-stream unified tokenizer. A lightweight semantic stream anchors discriminative features, while a Transformer-augmented pixel stream recovers fine-grained visual details into a unified compact latent space. Second, to eliminate external dependencies, we propose a self-aligned generation paradigm that natively leverages this optimized tokenizer as an internal alignment teacher for the diffusion model. Furthermore, to facilitate flexible multimodal interaction within this unified space, we introduce Dynamic Token Routing, which enables each token to adaptively aggregate multi-layer MLLM features based on its distinct semantic demands. Extensive experiments demonstrate that SPAR establishes the state-of-the-art for unified architectures, achieving exceptional generation and reconstruction quality while preserving foundational visual understanding capabilities.

End-to-end OCR increasingly relies on autoregressive sequence models, where the quadratic cost of Transformer attention limits efficient transcription of long, paragraph-level text. State-Space Models (SSMs) such as Mamba offer linear-time decoding and have recently been shown to match Transformer accuracy on printed historical lines, but their behavior as sequences grow from short lines to full paragraphs, and their generalization to handwriting, remain poorly understood. We study how a Mamba-based OCR recognizer scales from lines to paragraphs. We first conduct a systematic exploration of its four core hyperparameters (decoder depth, state dimension, expansion factor, and connector depth) on synthetic paragraphs from 100 to 1,000 characters, identifying the recurrent state dimension and the expansion factor as the dominant levers for long-sequence accuracy. We then compare the recognizer against a Transformer baseline trained under an identical protocol. On clean synthetic paragraphs, both models stay below 1% CER at every length while the SSM runs 1.4 to 4.5 times faster, the speedup growing with sequence length. On real handwriting, however, the SSM lags clearly behind: it reaches 8.2% CER on IAM lines and 10.0% on IAM paragraphs, against 4.2% and 3.5% for the Transformer baseline. Through controlled experiments we show that a substantial part of this gap stems from data scarcity rather than from an intrinsic architectural limit: the autoregressive SSM decoder is markedly data-hungry on long sequences. Our study clarifies when SSMs are a practical choice for large-scale document transcription and when they are not.

We develop a spectral theory for \emph{normalized corrected GNN propagation}. The object of study is the symmetric normalized adjacency with its degree-stationary component removed, matching the normalization used by standard GCN-style models while isolating the stationary direction most directly tied to oversmoothing. The central theoretical question is whether this corrected normalized operator preserves class-discriminative signal after many propagation layers. Our main result is a high-probability exact-recovery theorem for the binary Contextual Stochastic Block Model after \(k=O(\log n)\) propagation steps in the dense polylogarithmic regime \(p\ge C\log^B n/n\), for any fixed \(B>4\), under explicit graph-signal and feature-SNR conditions. We also establish a multi-class partial recovery theorem showing contraction toward class centers for most nodes. Synthetic and real node-classification experiments are included as empirical checks of the theory's predicted dependence on depth, graph signal, and feature noise.

The task of compositional generation involves using a conditional generative model, trained only on a subset of the possible conditions, to produce samples from compositionally-defined target distributions such as a geometric combination of the source distributions. In this work, we argue that this task is often infeasible for vanilla conditional diffusion models: we conjecture that no inference-time technique can efficiently produce samples from the target distribution in certain well-motivated settings. This idea is supported by theory-guided generalization arguments and carefully-designed experiments on both synthetic and realistic data. In particular, while recent methods such as Feynman-Kac correction reduce inference-time approximation error, our results show that score estimation error has a more catastrophic effect on performance when the target distribution is out-of-distribution with respect to the sources, highlighting the need for a different approach to this task.

Configuring the hyperparameters of Mixed-integer programming (MIP) solvers is a high-dimensional, instance-dependent optimization problem where suboptimal settings can degrade solving time by orders of magnitude. Default configurations are often suboptimal, while traditional tuning methods either suffer from the ``cold-start'' problem and inefficient search or heavily rely on expert experience. This paper introduces \textbf{GRIMIP} (\textbf{\underline{G}}eneral \textbf{\underline{R}}easoning for \textbf{\underline{I}}nstance-specific \textbf{\underline{MIP}} configuration), a novel hybrid intelligence framework that synergistically integrates the semantic reasoning capabilities of Large Language Models (LLMs) with the sample-efficient search of Bayesian Optimization (BO). GRIMIP enables the LLM to function as a complete probabilistic surrogate within the BO loop, significantly improving performance and reducing sampling and evaluation costs. On seven benchmarks including MIPLIB, GRIMIP achieves over 40\% reduction in Primal-Dual Integral on hard instances, outperforming SMAC and other LLM-assisted BO methods. By granting LLMs sufficient autonomy, GRIMIP combines the expert-level reasoning of LLMs with the efficient search of BO, achieving state-of-the-art performance.

Training dynamics is central to understanding neural networks, yet its theoretical analysis remains difficult even for simple architectures and becomes substantially more challenging for general modern architectures. In this paper, we propose a convergence framework for analyzing gradient descent (GD) dynamics under a broad family of neural network architectures and datasets beyond the neural tangent kernel (NTK) regime. The framework is formulated at the level of network blocks and covers architectures including pre-normalized multi-layer transformers. More precisely, under mild assumptions, we prove that for almost all initializations, GD with regular learning rates converges to the neighbourhood of a stationary point. This is mainly proved by establishing an iterate-dependent PL-type inequality through analyticity and measure-zero arguments, and by proving Lipschitz smoothness along the GD trajectory through polynomial generalized smoothness and a local relaxed dissipative condition. We further interpret the theorem under Xavier initialization and practical architectural scaling, showing that the learning rate scale depends on the depth and effective bottleneck dimensions rather than the largest width. Finally, we derive structural nondegeneracy implications for residual connections and function composition, and provide a generic characterization of global minimizers within our framework.

Large language models (LLMs) are typically pretrained on short sequences and then extended to work on longer sequences with additional training. However, such LLMs still struggle to further generalize to very long sequences. We propose Randomized YaRN, a training method that improves length generalization by combining YaRN-based positional extrapolation with randomized positional encoding and a length curriculum. During training on short context data, tokens are assigned YaRN positional encodings sampled from a larger position range, exposing the model to out-of-distribution positional representations even on short-context inputs. We evaluate Randomized YaRN on two challenging long-context reasoning benchmarks, BABILong and Multi-Round Coreference Resolution (MRCR). When training on data with <8K context, Randomized YaRN consistently improves reasoning performance on context lengths from 16K to 128K and outperforms standard fine-tuning, with the largest gains appearing at far out-of-distribution lengths. Our results suggest that progressively exposing models to OOD positional distributions provides an effective recipe for generalizable long-context reasoning.

Multi-agent systems are widely used in safety-critical applications that require coordinated behavior under strict safety constraints. Existing approaches face a fundamental trade-off: learning-based methods achieve strong empirical performance but lack theoretical safety guarantees, while control-theoretic methods enforce safety but often lead to overly conservative and inefficient behaviors. We propose a hierarchical multi-agent reinforcement learning framework that enforces hard safety constraints under mild assumptions at low level via a constraint manifold, while enabling effective coordination through high-level policy learning. Our approach provides theoretical safety guarantees in the multi-agent setting and yields stationary learning dynamics, thereby enabling stable and efficient training. Empirically, our method achieves competitive performance while maintaining nearly perfect safety rates, and generalizes effectively to varying numbers of agents and obstacles.

Automated diagnosis of 3D brain CT scans is essential for critical care, yet it remains challenging due to the heavy reliance on manual annotations and the limited semantic understanding of conventional models. While 2D foundation vision-language models (VLMs) have shown remarkable generalization, effectively transferring their representational power to 3D volumes remains an open problem. In this paper, we propose Brain-Adapter, a novel dual-stream multiple instance learning (MIL) framework that leverages pre-trained 2D biomedical VLMs and raw diagnostic reports for robust scan-level multi-label classification. Specifically, we introduce a Text-Conditioned Attention (TCA) mechanism, utilizing raw diagnostic sentences as semantic queries to dynamically align visual cues with specific disease concepts. Concurrently, a parallel visual MIL stream captures global scan characteristics, supervised by structured labels extracted via a Large Language Model (LLM). To ensure representation coherence, a consistency constraint enforces synergy between the two streams. During inference, an Uncertainty-Aware Refinement (UAR) module dynamically calibrates and fuses these dual-stream predictions to resolve ambiguous cases. Extensive experiments demonstrate that our method significantly outperforms state-of-the-art 3D models and standard MIL approaches. By eliminating the reliance on dense annotations, Brain-Adapter provides a highly scalable and clinically viable solution for 3D acute intracranial pathology analysis.